Главная » Крепежные детали из стеклонаполненного пластика

UPA6-30M

UPA6-30M - Информация

UPA6-30M

30% CF Reinforced PA-6

UPA6-30M is a normal viscosity, heat stabilized polyamide-6, 30% carbon fiber reinforced. UPA6-30M has high strength and stiffness with ESD and el.conductive properties.

Product Characteristics

Status Commercially: active

Applied test method ISO

Availability Europe

Method of Use injection moulding, profile, pipes and rods extrusion.

Application High temperature engineering/industrial items working at high temperature conditions and under

high loading. Automotive. Railroad transport. Business/office goods. Sport.

Typical Properties		Method	Units	Value
General Properties
Density	ISO	1183	g/cm	1,26
Viscosity Number.	ISO	307	ml/g	140
Water absorption (saturation)	ISO	62	%	5,2
Humidity absorption (23°C/50%r.h.)	ISO	62	%	1,6
Molding shrinkage parallel	ISO	294-4	%	0,15
Molding shrinkage normal	ISO	294-4	%	0,3
Mechanical Properties
Tensile E-Modulus	ISO	527-2 (1 mm/min)	MPa	18500
Stress at break	ISO	527-2 (5 mm/min)	MPa	200
Strain at break	ISO	527-2 (5 mm/min)	%	3,0
Tensile strength at break	ISO	178	MPa
Flexural strength at break	ISO	178	MPa	210
Flexural modulus	ISO	178	MPa	19000
Impact strength (Charpy @ +23°C)	ISO	179/leU	kJ/m	45
Impact strength (Charpy @ -30°C)	ISO	179/leU	kJ/m	25
Notched Impact strength (Charpy @ +23°C)	ISO	179/leA	kJ/m	12
Notched Impact strength (Charpy @ -30°C).	ISO	179/leA	kJ/m	8
Rockwell Hardness (R-Scale).	ISO	868.	Points	122
Thermal Properties
Melting point (DSC)	ISO	11357	°C	214
Heat deflection temperature HDT/A	ISO	75 (1,80 MPa)	°C	203
Heat deflection temperature HDT/B	ISO	75 (0,45 MPa)	°c	209
Flammability class (UL 94)	ISO	1210 (1,6 mm)	rating	HB
Flammability class (UL 94)	ISO	1210 (3,2 mm)	rating	HB
Electrical Properties (conductor)
Dielectric coefficient @ 1MHz	IEC 60250		—
Dielectric strength	IEC 60243-1		kV/mm
Comparative tracking index	IEC 60112 (CTI)		—

General processing recommendations

UPA6-30M can be processed under the following recommended conditions. Adjusting modes of processing may be recommended depending on the specific issues related to the design, dimensions, appearance and/or processing method and equipment used.

Melt temperature at extrusion 225-250 °C

Melt temperature at injection moulding 230-280 °C

UPA6-30M drying is required to ensure the moisture content no higher than 2000 ppm during the processing.

Prolonged dwell times for the melts in the extruder should be avoided.

Lower temperatures has to be settled up for the idling time.

Please contact us for further information.

Storage and handling

UPA6-30M should be stored at room temperature and normal atmospheric pressure in original packaging (plastic bags 25 kg, octabin boxes or 1000 kg big-bags).

The product should be stored in dry, well ventilated areas. It is also recommended to avoid prolonged storage at extreme temperatures and humid environment.

It is recommended to use the product within 12 months after delivery, at appropriate storage conditions. For more information, please apply to the Safety Data Sheet.

Полиамид ПА6-Л-У1 (неокрашенный)